Fix Driver WUDFRd Failed to Load/Missing [5 Ways]

Many Windows users have been complaining about facing the “Fix Driver WUDFRd Failed to Load/Missing” error after they updated their Windows version to the latest Windows 10 operating system.

If you too are facing the same issue and is in search for a guide on how to fix Driver WUDFRd Failed to Load/Missing error in the Windows operating system, then today we bring you a couple of different ways following which you can fix the error that you are facing.

You can follow the methods listed below to resolve the error not just on Windows 10 systems, but also on systems running the Windows XP, Windows 7, Windows 8, and Windows 8.1 operating system.

What is the “Driver WUDFRd Failed to Load/Missing” Error in Windows?

Before we go ahead and take you through the different solutions to fix the “Driver WUDFRd Failed to Load/Missing” error, let us explain what the error is.

As you may be able to decode from the error message, the “Driver WUDFRd Failed to Load/Missing” error indicates that some necessary device drivers on your PC failed to get loaded or was found missing.

This error mainly appears after updating Windows to the latest version because soon after the update, not all device drivers will be updated to their latest version to be compatible with the latest Windows version. Some device drivers will take time to get updated whereas some other device drivers will require manual updating.

The “Driver WUDFRd Failed to Load/Missing” error is a simple error and can be fixed easily by following some simple solutions.

How to fix “Driver WUDFRd Failed to Load/Missing” Error in Windows?

Solution #1: Turn OFF Hard Disk Hibernation

  1. Press the Windows key + X key.
  2. From the popup menu that appears, click on “Power Options”.
  3. A new Power Options window will now appear.
  4. In the window, click on the “Additional Power Settings” option.
  5. The Control Panel window will now open.
  6. Click on the “Change plan settings” option and then click on “Change advanced power settings”.
  7. A small Power options window will now open.
  8. From the list, click on “Hard Disk” to expand the options.
  9. From the expanded options under Hard Disk, you will find the “Turn off hard disk after” option.
  10. Using your mouse, click on the up arrow to change the value in the box to “Never”. You can find the “Never” option above the “0” value.
    Turn OFF Hard Disk Hibernation
    Turn OFF Hard Disk Hibernation


  11. Click on “Apply” and then click on “OK”.

Solution #2: Manually Check for Windows Updates

  1. Click on the Search bar located in the bottom left corner of your taskbar.
  2. Search for “Windows Updates”.
  3. In the search results, click on the “Check for Updates” option.
  4. If there are any driver updates for your Windows system, it will get downloaded and installed now. Wait for a while if there are any new updates.
  5. After installing the new updates, reboot your system.

Solution #3: Remove and Install USB Controllers Again

  1. Press the R key + Windows key to bring up the Run menu.
  2. Type in the command “ devmgmt.msc” and click on the “OK” button.
  3. The Device Manager window will now open.
  4. Find the “Universal Serial Bus controllers” option and expand the same.
  5. Using your mouse, right-click on each item that appears after expanding the “Universal Serial Bus controllers” option, and then click on the “Uninstall” option that appears in the drop-down menu.
  6. If a confirmation prompt appears, click on the “Yes” option.
  7. Reboot your system.
  8. Now, follow Step 1 and Step 2 to launch the Device Manager window again.
  9. Click on the “Universal Serial Bus controllers” option.
  10. In the top menu bar of the Device Manager window, click on the “Actions” tab.
    Remove and Install USB Controllers Again
    Remove and Install USB Controllers Again


  11. From the list of options that appear, click on “Scan for hardware changes”.
  12. Follow the set of on-screen instructions to install the drivers again that you uninstalled.

Solution #4: Manually Update Faulty Device Drivers

  1. Press the R key + Windows key.
  2. When the Run window appears, type the command “devmgmt.msc” and press Enter.
  3. The Device Manager window will open.
  4. With the Device Manager window, find faulty drivers installed in your system. The faulty drivers will have an exclamation mark next to them.
    Manually Update Faulty Device Drivers
    Manually Update Faulty Device Drivers


  5. Using your mouse, right-click on each faulty driver and then from the list of options that appear, select the “Update Driver” option.
  6. In the next window, click on “Search automatically for updated driver software”.
  7. Wait for the driver updates to get installed.
  8. Reboot your Windows system.

Solution #5: Launch the “Windows Driver Foundation” Service

  1. Press the R key + Windows key on your keyboard.
  2. In the Run window, type “services.msc” and click on “OK”.
  3. The Services window will now open.
  4. Within the window, find the service with the name “Windows Driver Foundation – User-mode Driver Framework”.
  5. Using your mouse, right-click on the service and from the list that appears, select the “Properties” option.
  6. Within the Properties window, switch to the “General” tab.
    Launch the “Windows Driver Foundation” Service
    Launch the “Windows Driver Foundation” Service


  7. Set the “Startup type” option to “Automatic”.
  8. Check if the “Service Status” option is displaying “Running”. If not, click on the “Start” button.
  9. Click on “Apply” and then on “OK”.
  10. Reboot your system.

Final Words

The “Driver WUDFRd Failed to Load/Missing” error in Windows is a pretty simple error and hence all the solutions to fix “Driver WUDFRd Failed to Load/Missing” error are also easy to follow.

However, if you are facing any difficulties while trying to fix the “Driver WUDFRd Failed to Load/Missing” error by following the above solutions, then do leave a comment below with your exact problem and we will guide you in solving it.

Leave a Comment