Are You facing Error like ethernet doesn’t have a valid IP configuration Then Here We come back with the tutorial where You can fix ethernet doesn’t have a valid IP configuration windows 10. If You are getting the error like Ethernet invalid ID Then here we are going to share the best tutorial to fix Ethernet doesn’t have a valid IP configuration Error.

Ethernet does not have a valid IP configuration when your NIC (Network Interface Card) is connected to your router or modem via Ethernet cable, then a valid IP address is not available. There are many reasons for getting this error but three main causes for this issue to occur, The first one is incorrect IP Address, faulty Network Interface Card And Faulty Router. So Here we are going to share the different method to solve this issue. So let’s check out below for more details.

How to Fix Ethernet doesn’t have a valid IP configuration Error

Method – 1 Restart Your System

1) Firstly Right Click On Start Menu and Then Windows Menu Will be Open.

2) Now Click on Power Option

3) Then Click On Choose what the power buttons do / Choose what the power button does

4) Now Click on Change settings that are currently unavailable.

5) Then uncheck the checkbox beside Turn on fast startup (recommended) to disable Fast Startup.

6) Now Click on Save changes and Close the System Settings.

7) Restart Your System.

Method – 2 Reinstalling TCP/IP Settings

1) Firstly Right Click On Start Menu and Then Windows Menu Will be Open.

2) Now Select “Command Prompt(Admin).”

3) Then Enter Following Command and Enter button.

netsh winsock reset

netsh int ip reset

4) Now Restart Your Computer to Save Changes.

Method – 3 Disable and Enable your Network Interface Card

1) Firstly Type “RUN” In Windows Search bar and Type “ncpa.cpl” and Enter button.

2) Now Right click on the NIC and Select Disable and again Enable

3) Now You have to wait until successfully receives an IP address.

Method – 4 Change Network Adapter Settings

1) Firstly Type “RUN” In Windows Search bar and Type “ncpa.cpl” and Enter button.

2) Now Right Click On Wifi and select Properties.

3) Select Internet Protocol Version 4 (TCP/Ipv4) and click Properties.

4) Now Click On OK and Reboot Your System for save changes.

Method – 5 Uninstall Ethernet Drivers

1) Firstly Type “RUN” In Windows Search bar and Type “devmgmt.msc” and Enter button.

2) Now Right Click On Network Adapter and Click On Uninstall.

3) Then Click OK for confirmation and click Action then Scan for hardware changes.

4) Now Restart Your Windows PC.

Method – 6 Update your drivers

1) Firstly Type “RUN” In Windows Search bar and Type “devmgmt.msc” and Enter button.

2) Now Right Click On Network Adapter and Click On Update Driver Software.

3) Now Choose to Browse my computer for driver software.”

4) Then Click On “Let me pick from a list of device drivers on my computer.”

5) Now Update all the drivers and Reboot your PC.

Conclusion

Finally, We Share Different Methods and Now You Have Different Methods to Solve Error like local area connection doesn’t have a valid IP configuration. If You have any method then Share with error facing the user and help them to fix this error. If You are satisfied with all these methods then Comment us below in comment section and Share with your friends and family Member on social media.

LEAVE A REPLY

Please enter your comment!
Please enter your name here